The scissor type motorcycle lift is one of the lifts whose operating principle is similar to or the same as the working principle of scissors, except that the manual drive is replaced by the hydraulic drive of the cylinder, and then some guiding devices are added to form the scissor type motorcycle lift.

The scissor type motorcycle lift has a scissor mechanical structure, which makes the lifting platform have high stability, a wide working platform, and high carrying capacity, which makes the aerial working range bigger and suitable for more than one person to work at the same time. It makes work efficiency higher and safety more secure.

The Scissor Type Motorcycle Lift Rising Principle

The hydraulic system of a scissor type motorcycle lift when the hydraulic oil is through the vane pump to form a certain pressure, through the oil filter, flame-proof electromagnetic reversing valve, throttle valve, liquid-controlled check valve, balance valve, and other components into the lower end of the liquid cylinder, while the piston of the cylinder upward movement, so as to achieve the purpose of the table rise.

The Scissor Type Motorcycle Lift Descent Principle

When the piston of the cylinder moves downward, the hydraulic oil enters the upper end of the liquid cylinder through the explosion-proof electromagnetic reversing valve, and the return oil of the lower end of the cylinder returns to the oil tank through the balance valve, liquid-controlled check valve, throttle valve, and explosion-proof electromagnetic reversing valve. In order to ensure that the heavy descending can be safe and smooth, scissor type motorcycle lifts are set in the return oil road balance valve, balancing the pressure between the circuit, so that the speed of the table descending does not change due to changes in the weight. In order to prevent accidental, the lifting platform hydraulic system is also dedicated to increasing the liquid-controlled check valve, when the hydraulic line hair accidental explosion can also be safe self-locking. At the same time, the purpose of installing overload alarms is to prevent the use of overloaded equipment, resulting in safety accidents.

The electric control part of a scissor type motorcycle lift is to control the rotation of the motor by operating the button in the electric box, so as to realize the rising, falling, and pausing functions of the lifting platform.

Support parts: scissor type motorcycle lift lifting process is achieved mainly through the expansion and contraction of the cylinder to achieve the expansion and folding of the scissor support frame, so as to achieve the rise and fall of the platform.

The above is the scissor type motorcycle lift principle, including the principle of operation rise and descent, the operator can better understand the scissor type motorcycle lift principle, in order to improve efficiency.