1. The pneumatic lift rod on the pneumatic motorcycle lift table can be self-supporting lift work, with no need to pull the rope can achieve steady state work at 20m/s wind speed, 35m/s wind speed without damage, the use greatly reduced requirements, and can maximize the savings in manpower;

2. The rod of pneumatic lift rod adopts a round cross-section. In the same installation space, the square cross-section can provide higher strength, stiffness, torsional resistance, and bending resistance for a pneumatic motorcycle lift table;

3. The pneumatic lift rod is made of finely drawn aluminum alloy, and the drawing process and precision far exceed national standards;

4. The movement of the pneumatic lift rod is not in direct contact with the rod, which ensures the corrosion resistance of the rod surface;

5. The rise and fall of the rod of the pneumatic lifting rod is linked, without the frequent locking and unlocking process during the rise and fall of the rod section by section;

6. The pneumatic lift rod relies on a T-bar for self-locking, which can lock and keep the pneumatic motorcycle lift table working stably at any height and direction;

7. Pneumatic lift rod lifting actions are driven by power, no load can also be smoothly descending to ensure that the pneumatic motorcycle lift table system is in the harsh environment of reliable lifting work;

For more information about the pneumatic motorcycle lift table, please stay tuned to PUJIKAI.